Conventional systems are designed to give basic zonal and alarm activation. If a device is operated then sounders or bells will activate, indicating a zone on the control panel. This type of system can only indicate the appropriate zones and not individual devices. Panels range from Standard Range to the high capacity Capital Range.

Standard Range
Our Standard Range offer compact and economical solutions for applications where low cost and ease of installation are a priority. Many features and facilities are incorporated as standard, and panels area available in 1,2,4 and 8 zones.

Ionisation Detectors
Air in the dual sensing chambers is irradiated to produce ions that travel to the positive and negative electrodes, creating a current flow. As smoke enters the outer chamber, the flow drops and voltage increase.
Optical Smoke Detectors
The optional smoke detector uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED will be scattered and registered by the photo-diode.
Heat Detectors
The heat detector operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions, the two thermistors register similar temperatures, but, on the development of fire, the temperature recorded by the exposed thermistor will increase rapidly, resulting in an imbalance of the thermistors and causing the detector to change to the alarm state within the system. The components are strategically placed in the building to be protected, in such a way, that you can count on their constant, reliable and disturbance-free functioning.